The pilot operated inverted bucket drain valve is suitable for high-pressure and high-temperature steam systems, which can efficiently and continuously remove condensed water
○ Based on the density difference between steam and liquid.
○ The main valve is guided to open through a pilot valve and has a large capacity.
○ Rated pressure: PN25
○ Maximum allowable pressure (valve body): 2.45 MPa/200 ℃
○ Maximum allowable temperature (valve body): 450 ℃/1.03MPa
○ Steam action test:>3 times/1.6MPa
○ Maximum working pressure: 1.6MPa
○ Maximum operating temperature: 350 ℃
○ Cold test pressure: 3.8MPa
○ Gas test: 2.0MPa
○ The valve body and valve cover are both made of forged steel/cast steel.
○ All internal components are made of stainless steel and have increased wear resistance to extend the lifespan of the drain valve.
○ U-shaped channel design achieves water sealing effect without steam leakage.
○ Reliable and flexible closed system, no steam leakage,
Install a waterproof hammer device to prevent water hammer caused by fluid entering the valve body.
○ Built in check valve, suitable for superheated steam environment.
○ The built-in filter enables the drain valve to operate in a clean environment.
○ Select different flow curves based on pressure difference to increase drainage volume
○ Back pressure rate up to 90% or higher
○ Efficient and continuous removal of condensate water from the high-pressure steam main pipeline of the power plant to ensure operation
○ The steam tracing system of the petrochemical plant reliably blocks steam and drains water under high back pressure
○ Large heat exchanger or evaporator outlet to prevent water accumulation and improve heat transfer efficiency
○ High temperature steam side precise drainage control for paper drying cylinders and printing and dyeing shaping machines
○ Chemical reaction kettle jacket heating system needs to be stable in hydrophobic and anti steam lock situations
The pilot operated inverted bucket drain valve is suitable for high-pressure and high-temperature steam systems, which can efficiently and continuously remove condensed water
The pilot operated inverted bucket drain valve is suitable for high-pressure and high-temperature steam systems, which can efficiently and continuously remove condensed water
The pilot operated inverted bucket drain valve is suitable for high-pressure and high-temperature steam systems, which can efficiently and continuously remove condensed water