The pilot operated inverted bucket drain valve is suitable for high-pressure and high-temperature steam systems, which can efficiently and continuously remove condensed water
○ Based on the density difference between steam and liquid.
○ The main valve is guided to open through a pilot valve and has a large capacity.
○ Rated pressure: PN25
○ Maximum allowable pressure (valve body): 2.45 MPa/200 ℃
○ Maximum allowable temperature (valve body): 450 ℃/1.03MPa
○ Steam action test:>3 times/1.6MPa
○ Maximum working pressure: 1.6MPa
○ Maximum operating temperature: 350 ℃
○ Cold test pressure: 3.8MPa
○ Gas test: 2.0MPa
○ The valve body and valve cover are both made of forged steel/cast steel.
○ All internal components are made of stainless steel and have increased wear resistance to extend the lifespan of the drain valve.
○ U-shaped channel design achieves water sealing effect without steam leakage.
○ Reliable and flexible closed system, no steam leakage,
Install a waterproof hammer device to prevent water hammer caused by fluid entering the valve body.
○ Built in check valve, suitable for superheated steam environment.
○ The built-in filter enables the drain valve to operate in a clean environment.
○ Select different flow curves based on pressure difference to increase drainage volume
○ Back pressure rate up to 90% or higher
○ Efficient and continuous removal of condensate water from the high-pressure steam main pipeline of the power plant to ensure operation
○ The steam tracing system of the petrochemical plant reliably blocks steam and drains water under high back pressure
○ Large heat exchanger or evaporator outlet to prevent water accumulation and improve heat transfer efficiency
○ High temperature steam side precise drainage control for paper drying cylinders and printing and dyeing shaping machines
○ Chemical reaction kettle jacket heating system needs to be stable in hydrophobic and anti steam lock situations
The pilot operated inverted bucket drain valve is suitable for high-pressure and high-temperature steam systems, which can efficiently and continuously remove condensed water
Inverted bucket type drain valve relies on the buoyancy of the bucket body to open and close, with continuous drainage, reliable steam blocking
The pilot operated inverted bucket drain valve is suitable for high-pressure and high-temperature steam systems, which can efficiently and continuously remove condensed water