Internal thread high-pressure low-temperature needle valve is a precision valve designed specifically for extreme working conditions
○ Working pressure: Maximum 10000 PSI (689 bar)
○ Operating temperature: -196℃ (-320°F) to 30℃ (86°F)
○ Applicable media: LNG, LO2, LN2, LAr, CO2
○ Caliber: 1/8 "-1" (3mm-28mm)
○ Port type: threaded (BW butt welding, SW socket welding, loose fitting welding, etc.)
○ Material: 304, 316, 316L, 321, Hastelloy, Monel alloy
○ Integrated body forging, valve stem transmission threaded alloy structure;
○ The valve seat and valve core are welded with STL nickel based alloy, and the valve core has a reverse seal;
○ Top mounted design of valve stem packing,
○ All valves have undergone pressure testing;
○ All valves have been cleaned and meet the requirements of G-4.1 of the American Compressed ○ Gas Association, and can be used for liquid oxygen equipment;
○ The maximum working pressure is 69MPa, and the temperature ranges from -196℃ to 30℃
Internal thread high-pressure low-temperature needle valve is a precision valve designed specifically for extreme working conditions, suitable for low-temperature medium systems such as liquefied natural gas, liquid oxygen, and liquid nitrogen. It adopts internal thread connection method, which is convenient for installation and sealing; The valve body material is mostly stainless steel or low-temperature carbon steel, ensuring stable operation within the range of -196 ℃ to room temperature; The needle type valve core structure can achieve precise flow regulation and reliable cutoff, with high pressure resistance and excellent sealing performance. It is widely used in fields such as chemical, energy, and air separation equipment.
Adopting a 90 ° right angle flow channel design, it is suitable for pipeline systems with high pressure, high viscosity, or media containing micro particles. The conical needle valve core is matched with a hard alloy sealing surface to achieve precise flow regulation and tight shut-off.
The high-temperature and high-pressure card sleeve needle valve is made of integral forged heat-resistant alloy steel or stainless steel
Used for filling steel cylinders with corrosive gases and industrial pipelines and equipment with the same interface.