Bidirectional sealed knife gate valve, with no groove design, adopts a split structure, and an improved polyurethane lined valve seat sealing ring fully protects the valve body from medium erosion
○ DN50-DN200 16bar
○ DN250-DN400 10bar
○ DN450-DN600 8bar
○ DN650-DN800 6bar
○ Connection form: wafer
○ Switch form: Handwheel, Turbo, Pneumatic, Electric, Hydraulic, Electro Hydraulic, Chain Wheel Disk
○ Valve body material: WCB
○ Gate material: F55, F532205, SS310, SS316L, SS316, SS304
○ Sealing material: Polyurethane
○ Packing: aramid, high water-based, PTFE, rubber
○ Applicable medium: Suitable for solid media such as mud, urban sewage treatment, sugar factories, papermaking, pharmaceuticals, chemical products, etc
○ Split valve body design
○ Improved polyurethane valve seat, super wear-resistant, suitable for use in mines
○ Double layer middle head packing seal
○ Split type new bracket, increasing the strength of the bracket
○ Bidirectional sealed knife gate valve, with no groove design, adopts a two-piece structure, and an improved polyurethane lined valve seat sealing ring fully protects the valve body from medium erosion, especially recommended for use in mining sites.
○ When closed, the gate moves downwards, and the bottom edge of the gate contacts the sealing strip, compressing the sealing strip into the groove to achieve sealing between the valve body and the gate;
○ When the gate valve is opened, it moves upward and the bottom edge of the gate valve separates from the sealing strip. The sealing strip bounces up and the groove is flat, which can prevent the medium sediment from accumulating in the groove of the valve body during use of the knife gate valve.
○ Not easy to block, no residue, easy to clean pipeline, thus effectively improving the sealing effect of knife gate valve and preventing leakage when the valve is closed. Specially recommended for use in mining sites.
○ Manual on-site cut-off control of underground drainage or coal slurry pipelines in coal mines
○ Manually operate the switch valve at the bottom discharge outlet of the thickener in the beneficiation plant
○ During the maintenance of the branch pipes in the mine tailings pond, manual isolation and cut-off points are used on site
○ Manual slag discharge valve for corrosive slurry in acid leaching process of metallurgical mines
○ Temporary pumping station or mobile equipment supporting manual sewage discharge device in the mining area
The structural design of replaceable rubber sealing rings mainly relies on the close contact between the gate and the rubber sealing ring to achieve a sealing effect.
Manual through type plug valve is a type of valve where the gate and valve seat are always in close contact and sealed. Its principle is that the gate has a circular opening of the same diameter
No grooves, rubber lining, bidirectional sealing design, the valve body adopts a split structure including valve body, gate plate, and U-shaped sealing strip.