Bidirectional sealed knife gate valve, with no groove design, adopts a split structure, and an improved polyurethane lined valve seat sealing ring fully protects the valve body from medium erosion
○ DN50-DN200 16bar
○ DN250-DN400 10bar
○ DN450-DN600 8bar
○ DN650-DN800 6bar
○ Connection form: wafer
○ Switch form: Handwheel, Turbo, Pneumatic, Electric, Hydraulic, Electro Hydraulic, Chain Wheel Disk
○ Valve body material: WCB
○ Gate material: F55, F532205, SS310, SS316L, SS316, SS304
○ Sealing material: Polyurethane
○ Packing: aramid, high water-based, PTFE, rubber
○ Applicable medium: Suitable for solid media such as mud, urban sewage treatment, sugar factories, papermaking, pharmaceuticals, chemical products.
○ Split valve body design
○ Improved polyurethane valve seat, super wear-resistant, suitable for use in mines
○ Double layer middle head packing seal
○ Two type new bracket, increasing the strength of the bracket
○ Bidirectional sealed knife gate valve, with no groove design, adopts a two-piece structure, and an improved polyurethane lined valve seat sealing ring fully protects the valve body from medium erosion, especially recommended for use in mining sites.
○ When closed, the gate moves downwards, and the bottom edge of the gate contacts the sealing strip, compressing the sealing strip into the groove to achieve sealing between the valve body and the gate;
○ When the gate valve is opened, it moves upward and the bottom edge of the gate valve separates from the sealing strip. The sealing strip bounces up and the groove is flat, which can prevent the medium sediment from accumulating in the groove of the valve body during use of the knife gate valve.
○ Not easy to block, no residue, easy to clean pipeline, thus effectively improving the sealing effect of knife gate valve and preventing leakage when the valve is closed. Specially recommended for use in mining sites.
○ Remote pneumatic cut-off control of coal slurry discharge pipeline in coal mine underground
○ High concentration slurry cut-off valve for heavy medium or flotation system in coal preparation plant
○ Safety isolation device during regular maintenance of mine tailings conveying pipelines
○ Control of Corrosive Slurry Discharge in Wet Smelting Process of Metal Ore
○ Automatic opening and closing valve for sludge discharge outlet of mining area sewage treatment system
No groove design, bidirectional sealing structure, adopting an integral structure including valve body, gate plate, and U-shaped sealing strip.
The bidirectional self sealing pneumatic knife gate valve uses two rubber valve seats to clamp and press the gate to achieve a sealing effect. When the gate is fully opened
The circular sewage pneumatic knife gate valve is mainly sealed with metal between the gate and the sealing surface. This type of valve is best installed horizontally.